X-Plus ET

New series of stepping motor drives with EtherCAT interface and direct Input from the main AC power supply (from 110 VAC to 230 VAC). Optimized for coupling with SANYO DENKI stepping motors, fitted with encoder. Possibility to be connected directly from the main (from 110 VAC to 230 VAC), saving on transformer use. High performance in terms of power and able to further increase the application potential.

HIGHLIGHTS

  • Communication by means of EtherCAT Interface
  • Modes of operation: PROFILE POSITION and CSP
  • Full digital microstepping drive
  • Wide range of stepping motors to be coupled with: holding torque up to 9.2 nm and flange size up to 86 mm 
  • Extremely compact size
  • A highly sophisticated operation system, peserving anyhow the traditional ease of use of R.T.A. drives

TECHNICAL FEATURES

  • Range of operating voltage: 110-230 VAC
  • Protections:
    • Protection against under-voltage and over-voltage
    • Protection against a short-circuit at motor outputs
    • Overtemperature protection
  • Electronic damping facility for further acoustic noise and mechanic vibrations reduction
  • Available in boxed version with plug-in connectors
  • Maximum compactness
  • Optoinsulated auxiliary and programmable inputs and Outputs
  • External fans not needed
  • Warranty: 24 months

SETTING BY MEANS OF ETHERCAT INTERFACE

  • Wide range of motor phase current setting
  • Motor current overboost
  • Intelligent management of the current profile
  • Communication by means of EtherCAT (CoE) Interface
  • Modes of operation: PROFILE POSITION and CSP
  • Different variety of HOMING Ooeration modes
  • Encoder feedback

 

X-Plus ET

公司

R.T.A.

R.T.A. srl