EtherCAT
es la red Ethernet abierta en tiempo real desarrollada originalmente por Beckhoff. EtherCAT establece nuevos estándares de rendimiento en tiempo real y flexibilidad topológica.
¿Por qué utilizar EtherCAT?
EtherCAT Technology Group
El ETG es una organización global en la que OEM, Usuarios Finales y Proveedores de Tecnología unen fuerzas para apoyar y promover el desarrollo tecnológico.
¿Quiénes somos?
Novedades ETG
10/2024 | The MODEX 2024 show in Atlanta (GA), USA, was a while ago, but our colleagues there shot an exciting video interview with our Executive Director Martin Rostan that we don't want to withhold from you.
Más...
10/2024 | This year's Shanghai Industrial Fair has successfully concluded, showcasing cutting-edge technologies and industrial innovations. Among the highlights was the impressive EtherCAT display, which once again demonstrated its performance advantages in real-time communication systems.
Más...
09/2024 | ETG is excited to announce our participation in the 50th Anniversary of IEEE IECON, taking place from November 3-6, 2024, at the Sheraton Grand Chicago Riverwalk. You can find us at Booth 200, located near the entrance of the exhibition area.
Más...
09/2024 | We cordially invite you to register for the EtherCAT Seminar in Mechelen, Belgium, on October 15, 2024.
Más...
09/2024 | Come and visit the AUTOMATIK 2024 in Brøndby - the place for automation, motion & drives in Denmark: Attend the daily presentation 'Ditch the switch with EtherCAT' for free!
Más...
08/2024 | We are set to participate in the upcoming Industrial Automation Show (IAS) 2024, taking place from September 24 to September 28 in Shanghai, China. As a leading event in the field, IAS brings together industry leaders, experts, and innovators to explore the latest trends and technologies in industrial automation.
Más...
08/2024 | The TechnoFrontier 2024 ended with a great success. About 500 visitors stopped by the ETG Joint Booth.
Más...
08/2024 | For the first time, ETG will be participating in the Automation Taipei Intelligence and Robot Show in Taiwan!
Más...
07/2024 | We recently took part in the Industrial Open Network Fair 2024 in Japan. The presentations given by our Japanese EtherCAT expert Masanori Obata were extremely well received and a total of almost 300 people attended in Tokyo and Osaka to find out more about EtherCAT.
Más...
07/2024 | In June, the Semiconductor Technical Working Group of the EtherCAT Technology Group (ETG) met for the 25th time. The anniversary meeting, which took place at ETG member company Applied Materials in Santa Clara, California, USA, was attended by over 70 people both in person and online.
Más...
Últimas entradas de productos
10/2024 | IO-Link master as single and multiprotocol, including IO-Link Hub, as well as digital multiprotocol module. Wide temperature range from -40 °C to +70 °C, high degree of protection IP 67 and IP 69K.
10/2024 | IndustrialPI is versatile industrial PC based on the familiar Raspberry Pi technology. IndustrialPI can be used purely as an industrial PC, as an industrial controller (soft PLC) or as an IIoT gateway for your data.
10/2024 | EtherCAT/FSoE supported on the amGardpro networked range of interlocks and control stations from Fortress Safety
10/2024 | Benefit from our comprehensive portfolio of testing, inspection and certification services for your hard- and software systems. We support you from chip design to overall evaluation of your system.
10/2024 | The EtherCAT Master can be installed in an existing customer's operating environment by installing this module. The data to be sent and received via EtherCAT communication and the data of the customer's system are sent and received via the DPRAM in the module. 16-bit parallel data bus is required.
10/2024 | Real-time communication from the ROS2 platform from the upper motion system calculation information capture to motion control is realized on a single FPGA-equipped board. Provides an on-board development platform (board, software environment, OS, drivers, communication, etc.).
10/2024 | ICOP's QEC-RXXMP: A Three-Axis EtherCAT Stepper Motor Controller with Encoder Interface achieving 125μs High-Speed Synchronous control, Supporting CiA402 Communication and G-code Mode.
10/2024 | The INFICON Augent® Optical Plasma Gauge is a compact and intelligent solution for vacuum monitoring. It combines two sensor technologies. Gas type monitoring and total pressure measurement.
10/2024 | RMP EtherCAT is a Windows based soft motion controller and master that is programmable in C++, C#, VB, or Python. RMP offers an open solution that works seamlessly with all EtherCAT-compatible SubDevices. As of September 2024, RMP works with 400+ SubDevices provided by over 58 manufacturers.
10/2024 | RMP EtherCAT is a Linux based soft motion controller and master that is programmable in C++, C#, VB, or Python. RMP offers an open solution that works seamlessly with all EtherCAT-compatible SubDevices. As of September 2024, RMP works with 400+ SubDevices provided by over 58 manufacturers.
09/2024 | THERMASGARD® TM 65 - EtherCAT P - Immersion/ screw-in/ duct temperature measuring transducer
09/2024 | THERMASGARD® MWTM - EtherCAT P - Mean value temperature measuring transducer
09/2024 | THERMASGARD® HFTM - EtherCAT P - Sleeve sensor with temperature measuring transducer
09/2024 | THERMASGARD® ALTM 2 - EtherCAT P - Surface-contact temperature measuring transducer/ pipe surface-contact sensor
09/2024 | HYGRASGARD® KFTF - EtherCAT P - Duct humidity and temperature sensor (± 2.0%)
