Real-time Ethernet Port Multiplier CU2508
The real-time Ethernet port multiplier allows the connection of eight independent Ethernet networks. The CU2508 is connected to the PC via a gigabit uplink. The PC offers high-performance data transfer to the multiplier, which allocates the data to the relevant 100BASE-TX port based on an analysis of a frame prefix and sends them time-controlled with µs precision. Received frames are also allocated a prefix including a timestamp and sent to the PC. With the support of a driver, users have eight independent ports with full real-time characteristics available.
The CU2508 is used in applications in which several Ethernet ports are required that need to be realised outside the PC. TwinCAT supports the CU2508 and makes further network ports at the PC unnecessary. For extremely high demands, an EtherCAT installation can, for example, be distributed or expanded to up to eight lines in order to multiply the performance. The distributed clocks of the EtherCAT lines are synchronised.
An EtherCAT cable redundancy can also be realised using two ports of the CU2508.
|Protocol||EtherCAT and various others (depending on driver) as well as Ethernet TCP/IP|
|Number of Ethernet ports||8 x 100 Mbit/s and 1 x 1 Gbit/s (uplink)|
|Ethernet interface||RJ 45|
|Cable length||up to 100 m twisted pair|
|Data transfer rates||100BASE-TX and 1 Gbit/s|
|Power supply||24 (18…30) V DC, 100 mA, 3-pin Cage Clamp® connection (+, -, PE)|
|Dimensions (W x H x D)||approx. 146 mm x 100 mm x 30 mm|
Beckhoff Automation GmbH & Co. KG