CD_582+FS ECT

With the CD_582+FSOE, TR Electronic is now also opening up the diverse world of control systems with EtherCAT interface. The functionally safe encoders are not only perfectly adapted to the application in terms of their interface. Mechanically, they can be connected via solid shaft, hollow shaft (blind hole shaft) and through hollow shaft. The shaft diameters vary up to 12 mm for solid shafts and 15 mm for hollow and blind hole shafts. As required for safety-related measuring systems, the positive locking of the drive shaft is ensured by a keyway-keyway connection, and there is even a SIL-compliant torque support made of spring steel for the hollow and blind hole shafts.

There are also degrees of freedom in the scanning technology, with which the measuring system can be specifically adapted to the requirements. Whether fully magnetic scanning or with the fast, high-resolution scanning of optical position detection, the encoders are available for applications in accordance with SIL2/PLd or SIL3/PLe. There is a special feature for the devices with optical scanning as an option: In addition to the safe bus system, the position value is also output via an SSI or incremental interface (non-safety-related). This additional interface can be used, for example, to supply subordinate control loops without having to go via the control system. Detailed technical data, instructions, EPLAN macros and the safety-related characteristic values for direct import into standard planning and design tools can be found on the TR Electronic homepage.

The CD_582 SIL encoders FailSafe over EtherCAT from TR Electronic make the decision for safety-related encoders very easy: Same installation space, considerably higher safety. This is currently only available from TR Electronic with this wide range of variants.